A simulated emerald or radiant cut diamond lovers rings is the perfect choice if you are looking for a rectangular stone to be your forever adornment. While these diamond shapes are similar, they have a few distinct differences. Learn everything you need about these stunning stones. Learn the difference between an emerald or radiant cut couples jewlery.

 What is a radiant cut diamond matching couple necklaces?

 Henry Grossbard created the radiant cut in 1977. This square diamond shape combines all the best features from the round brilliant cut with the emerald.

 Radiant-cut diamonds are exactly that: radiant. So much so, that this sparkling stunner was first square cut diamond featuring a complete facet pattern of brilliant-cut on both the crown and the pavilion. You may be wondering what makes it so special. A radiant cut diamond is characterized by its vibrant sparkle, which shines and shimmers when the light hits it. Some believe the only stone to surpass the radiant in brilliance, is the round brilliant.

 Radiant cut diamonds look larger than other diamonds with the same weight due to their elongated shapes. Radiant cut stones are more durable due to their beveled corners, which make them less susceptible to chipping with everyday wear.

 This style of stone has some disadvantages, but that's true for any diamond shape. The Gemological Institute of America, or GIA, does not rate the quality of radiant-cut diamonds. You will have to work with an expert to determine the quality of your stone. The bow tie effect is another problem that can affect radiant cut diamonds. The bow-tie effect is when a dark line runs across the center of an object from left to rights. It's a defect that can occur in many fancy shapes, such as oval cut diamonds, pear cut diamonds or marquise cuts.

 Emerald Cut Diamond

 Emeraude cut diamonds have a rectangular shape that is reminiscent of art deco architecture from the 1920s. They are also recognizable by their chiseled steps and elongated shape. The diamonds in this style are recognizable for their linear facets running parallel down the stone, and its large sparkling table that reflects white and colorful light.

 Like judging the quality a radiant-cut diamond, judging an emerald-cut diamond can also be challenging. While the GIA grades symmetry and polish for fancy shapes like these, it does not have a common industry standard.

 You should be aware that every diamond cut has pros and cons. The pros are first. Emerald cut diamonds cost less per carat than other diamond shapes. Online and in brick and mortal shops, it is relatively easy to locate stones in this style. A stone with this elegant style will certainly impress. People love the emerald-cut for its appearance. The cons are next. Stone inclusions can be more easily seen with the naked eyes due to the shape's glassy appearance. If you want to avoid this, look for emerald cuts with higher clarity grades. Second, because of their facet patterns and design, the brilliance of emerald cuts is not as well known. They can look less sparkly and more dull than other diamond cuts.

 Length-to-Width Ratio

 This ratio determines the proportionality of a diamond with its intended form. Divide the stone's width by its length to find this number.

 Radiant Cut Diamonds - The Diamond Pro explains the length to wide ratio of radiant cut diamonds in the following way: "The ratio which you select for your radiant diamond depends entirely on what is most pleasing to you aesthetically." Radiant length-to-width ratios typically range from 1.00 to 1.35. Lower end of the spectrum indicates a more rectangular shape. Length to Width ratios are up to 2.0 if you want a rectangular shape.

 Emerald Cut Diamond: The Diamond Pro explains the ratio between the length and width of an emerald diamond as follows, "A rectangular emerald diamond can range from 1.30-1.60, but most people opt for a ratio around 1.50. "Consider also how the stone will appear in your chosen setting."

 Clarity grade

 Diamond clarity can be measured by the GIA Diamond Clarity Scale. This is based on the absence or presence of blemishes, inclusions, and other imperfections in a gemstone. Although many inclusions are not visible with the naked eyes, they have a significant impact on the value of the stone.

 Radiant Cut Diamond - Due to its intense brilliance the inclusions of a low clarity radiant diamond are difficult to see. For a flawless gem, look for stones with an SI1 clarity or SI2 clarity. Consider an I1 diamond for a little extra money if you have a limited budget. You may want to upgrade the clarity of a two-carat or larger stone to VS2 if it is likely that the diamond will have inclusions.

 Emerald Cut Diamond - Unlike radiant cut diamonds which hide flaws, step cut diamonds do not. Therefore you will have to be very careful when choosing your center diamond. A VS2 clarity rating will give you a clean emerald diamond without breaking the bank. When shopping for emerald cuts that are three carats in size or greater, keep in mind that the imperfections will be more apparent the larger the diamond.

 Engagement Rings

 You should carefully consider the setting of your engagement ring and how it will look with your chosen diamond shape. There are many settings that will work better with your radiant or an emerald-cut stone.

 Radiant Cut: The radiant cut is already bigger than popular princess and round brilliant cuts. A halo engagement setting will elevate your radiant diamond to a new level. Bezel-set solitaire rings and three-stone engagement rings that feature a center stone framed by a baguette diamond are other popular styles.

 Emerald Cut Diamond: Emerald cut diamonds pair well with understated styles like a sleek solitaire ring or a simple pave setting. For a bit more shine, you can opt for stylish settings with three stones of emerald-cut diamonds. If you compare emerald and princess cut engagement rings, emerald-cut diamonds look much more subdued.

 Price Comparison

 What is the price of emerald or radiant cut diamonds?

 Radiant Cut: This style of diamond is cheaper because the cutting process uses a lot of the rough diamond.

 Emerald Cut Diamond - A great choice for those seeking a larger diamond without going broke. An emerald diamond will appear larger than other diamonds at the same carat.

 Knowing the benefits and differences of each diamond shape will help you make a better decision when you are looking for a ring. Browse our collections today to find out which cut you like best.